Decreased speed

• Troubleshooting Methods:

  1. Check if the 'Turtle' icon or 'Creep' icon on the monitor is lit.

  
  

  1.1​The 'Turtle' Speed icon is lit

  Fault cause:

  1.1 The Turtle Speed switch is activated, so the stacker is in turtle speed mode.

  
  

  ​2. 'Creep' icon is lit:

  Fault cause:

  2.1If the forks raise to above 50cm, and the lifting speed limiter switch will be activated , the stacker's travel speed will slow down. This is a safety setting.

  
  

  2.2.Consistently slow speed regardless of the fork's position.

  Fault cause:

  Lifting limit switch fault

  
  

  
  

  3.The 'Turtle' icon or 'Creep' icon not lit on the monitor, consistently slow speed regardless of the fork's position.

  Fault cause:

  3.1 Drive Wheel Slip

  3.2 Accelerator Fault

  3.3 Monitor Fault

  3.4 ​​Controller Fault

  3.5 Driving Motor Fault

  
  

  4.Normal speed during empty load operation, but slows down under loaded conditions.

  
  

  Fault cause:

  Drive Wheel Slip

  
  

  Warranty Period:

  One year (not applicable for human - caused damages such as water ingress or collisions).

  
  

  Required information for warranty claims:

  1. Stacker nameplate photo;

  2. Videos/photos of issues;

  3. Photo showing faulty part