Troubleshooting Videos - STAXX

LANGUAGE

EN
- FR
- ES
- RU

Troubleshooting Videos
Replace the drive wheel

Charge the stacker

Switch Between Chinese and English

How to access the diagnostic interface

Adjust the balance wheel

Simple way to repair cables

Measure the resistance of the drive motor harness at the controller end

Check if the belly switch is stuck

Check if the Emergency Reverse Button is Damaged

Observe the accelerator voltage on the diagnostic interface

Measure the Accelerator Voltage with a Multimeter

Observing Controller Temperature on the Diagnostic Interface

Measure brake resistance

Measure key switch resistance

Check the wiring harness plugs at the controller end

Check the charger output voltage

Stacker operation guide

Locate and repair damaged horn wiring

Unplug the horn cables for checking

Check the Downward Solenoid Valve Wiring

Check Drive Motor Current

Check whether the communication cable plug and harness are abnormal

Belly Switch Function Description

Measure hydraulic motor current with a clamp meter

Check the Hydraulic Motor Cables

Measure the Resistance of the Hydraulic Motor

Instruction Video for Switching Back to the Lead - Acid Mode

Use a multimeter to measure the on-off state of the emergency stop switch

Use a multimeter to measure the battery voltage

Check and clean the plug connector

Measure the Voltage of the Lift Control Knob

Check Brake Cables & Connector

Measure Traction Motor Resistance

Check Drive Wheel

Introduction to Correct Loading Procedure

Check wires around handlebar

Inspect Speed Limit Switch

Clean Main Harness Connector

Inspect Charging Protection Plug

Hydraulic Unit Low Oil Warning

Check the Return Oil Hose

Enter the diagnostic interface to check the brake signal

Battery Charging Guide

HOME

MAINTENANCE

Contact Us

Copyright © 2022 staxx Co., Ltd. All rights reserved.