Can't move,after restart the stacker, the functions become normal

• Cause of Failure:

  1.Wrong operation step. The handle was not in working zone while the accelerator was rotated, casued the stacker can't move.

  Solution:

  Operate the stacker properly：1. Press the  handle to the working range, then operate the stacker to move or lift/lower

  
  

  2.Emergency reverse switch is activate or stuck

  Solution:

  A: Restart the stacker, the function will be normal.

  B:Remove the emergency reverse switch and inspect for fractures or deformations.

  Solution:

  Remove the emergency reverse switch to temporarily operate the stacker. 

  Or replace the emergency reverse switch

  
  

  Warranty Period:

  One year (not applicable for human - caused damages such as water ingress or collisions).

  
  

  Required information for warranty claims:

  1. Stacker nameplate photo;

  2. Videos/photos of issues;

  3. Photo showing faulty part